Evaluasi pengelolaan limbah B3 cair proses produksi pada industri manufaktur di PT. Z, Kota Bandung

  • Ikhsan Rifqi Wiryawan Program Studi Teknik Lingkungan, Institut Teknologi Nasional, Bandung, Indonesia
  • Kancitra Pharmawati Program Studi Teknik Lingkungan, Institut Teknologi Nasional, Bandung, Indonesia
DOI: https://doi.org/10.36813/jplb.8.2.132-142
Keywords: manufacturing industry, hazardous and toxic materials, B3 waste management, scoring, Likert

Abstract

The disposal of hazardous and toxic waste (B3) originating from production processes can have negative effects on human health and the environment. PT. Z is a manufacturing industry that produces B3 waste as a result of its production activities. The presence of B3 waste requires proper management to avoid negative impacts. There are three types of waste produced: water coolant, expired chemicals, and used oil, each with characteristics that need to be well-managed. The research aims to assess the suitability level of hazardous and toxic waste management at PT. Z based on applicable regulations. In the research, data collection methods include both primary and secondary data, with data processing using Likert scale scoring. The research variables include the reduction, packaging, labeling and symbolizing, and storage of hazardous and toxic waste It was found that there were discrepancies in the variables of packaging, labeling, and symbolizing between the existing conditions and the regulations. The evaluation results indicate that hazardous waste management at PT. Z achieved a score of 90.32%, which is categorized as very good.

Downloads

Download data is not yet available.

References

Arikunto S. 2008. Prosedur penelitian suatu pendekatan praktik. Rineka Karya. Jakarta.
Damanhuri E. 2010. Diktat pengelolaan bahan berbahaya dan beracun (B3). Institut Teknologi Bandung. Bandung.
Exposto LAS and Sujaya IN. 2021. The impacts of hazardous and toxic waste management: A systematic review. Interdisciplinary Social Studies 1(2):103-123. https://doi.org/10.55324/iss.v1i2.20
Fajriyah SA dan Wardhani E. 2020. Evaluasi pengelolaan limbah bahan berbahaya dan beracun (B3) di PT. X. Jurnal Serambi Engineering 5(1):711-719. https://doi.org/10.32672/jse.v5i1.1597
Gan YX, Gan BJ, Clark E, Su L and Zhang L. 2012. Converting environmentally hazardous materials into clean energy using a novel nanostructured photoelectrochemical fuel cell. Materials Research Bulletin 47(9):2380-2388. https://doi.org/10.1016/j.materresbull.2012.05.049
Godswill AC, Gospel AC, Otuosorochi AI and Somtochukwu IV. 2023. Industrial and community waste management: global perspective. American Journal of Physical Sciences 1(1):1-16. https://doi.org/10.47604/ajps.1043
Li M, Xu J and Li B. 2018. Analysis of development of hazardous waste disposal technology in China. IOP Conference Series: Earth and Environmental Science 178(1):1-7. https://doi.org/10.1088/1755-1315/178/1/012027
Meirinawati M, Fanida EH and Prabawati I. 2018. Strategy management of hazardous and toxic waste processing by PT Artama Sentosa Indonesia (study of transporting and collecting hazardous and toxic waste). In 1st International Conference on Social Sciences (ICSS 2018) 226(1):181-186.
Nurhidayanti N dan Arinih C. 2019. Pengelolaan limbah B3 PT YTK Indonesia. Pelita Teknologi 14(2):93-102. https://doi.org/10.37366/pelitatekno.v14i2.234
Nwankwo CN, E Gobo A, Israel-Cookey C, and A Abere S. 2020. Effects of hazardous waste discharge from the activities of oil and gas companies in Nigeria. Central Asian Journal of Environmental Science and Technology Innovation 1(2):119-129.
PerMenLH (Peraturan Menteri Lingkungan Hidup) Nomor 14 Tahun 2013 tentang simbol dan label limbah B3.
PerMenLHK (Peraturan Menteri Lingkungan Hidup dan Kehutanan) Nomor 6 Tahun 2021 tentang tata cara dan persyaratan pengelolaan limbah berbahaya dan beracun.
Pertiwi V. 2017. Evaluasi pengelolaan limbah bahan berbahaya dan beracun (B3) di Rumah Sakit Roemani Muhammadiyah Semarang. Jurnal Kesehatan Masyarakat 5(3):420-430. https://doi.org/10.14710/jkm.v5i3.17260
PP (Peraturan Pemerintah) Republik Indonesia Nomor 22 Tahun 2021 tentang penyelenggaraan perlindungan dan pengelolaan lingkungan hidup.
Singh T, Dureja JS, Dogra M and Bhatti MS. 2018. Environment friendly machining of Inconel 625 under nano-fluid minimum quantity lubrication (NMQL). International Journal of Precision Engineering and Manufacturing 19:1689-1697.
Sugiyono. 2013. Metode penelitian kuantitatif, kualitatif dan R&D. Alfabeta CV. Bandung.
Supriyanto E. 2020. Manufaktur dalam dunia teknik industri. Jurnal Industri Elektro dan Penerbangan 3(3):1-4.
Tarigan EM dan Amalia A. 2022. Penyimpanan limbah bahan berbahaya dan beracun B3 (studi kasus pengolahan, penampungan, penjernihan dan distribusi air bersih CV X). Indonesian Journal of Applied Science and Technology 3(2):57-66.
Taufan HS and Purwanto P. 2018. The management of toxic and hazardous waste materials in the food industry. E3S Web of Conferences 73(1):1-5. https://doi.org/10.1051/e3sconf/20187307020
Utami KT dan Syafrudin S. 2018. Pengelolaan limbah bahan berbahaya dan beracun (B3) studi kasus PT. Holcim Indonesia, Tbk Narogong Plant. Jurnal Presipitasi: Media Komunikasi dan Pengembangan Teknik Lingkungan 15(2):127-132.
Yahaya KM, Abdul Karim ZA, Hagos FY, Aziz ARA and Tan IM. 2014. Current trends in water-in-diesel emulsion as a fuel. The Scientific World Journal 2014(1):1-15. https://doi.org/10.1155/2014/527472
JPLB, Vol 8, No 2 (2024)
Published
2024-08-26
How to Cite
Wiryawan, I., & Pharmawati, K. (2024). Evaluasi pengelolaan limbah B3 cair proses produksi pada industri manufaktur di PT. Z, Kota Bandung. Jurnal Pengelolaan Lingkungan Berkelanjutan (Journal of Environmental Sustainability Management), 8(2), 132-142. https://doi.org/https://doi.org/10.36813/jplb.8.2.132-142
Issue
JPLB, Vol 8, No 2 (2024)
Section
Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with this journal agree to the following terms:
a. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
b. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
c. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).